 | Kip |
| 1 Start wand (use wand marked II, connected to S1 and S2). |
| 2 Extra start wands (I and III). |
| 2 Orange spools of wire (2 twisted pair). |
| 6 Extra bibs for racers/forerunners. |
| 1 Roll electric tape. |
| 1 Roll duct tape. |
| 1 L1/L2 plug, L2 for ALGE headset. |
| ALGE headset and gray ALGE box. |
| 1 Short length of wire (for ALGE headset). |
| 1 Gate Judge Card, for start referee. |
| ATC |
| 2/4 Sets of gate numbers tags (one set per course per run). |
| 2/4 Gate dye, red and blue (one bottle per course per run). |
| 2 2x4 to mount start wand. |
| 4 Red START signs. |
| 10-99 Plain bamboo (to string wire). |
| 2 TRAIL CLOSED signs (one above race start and one at race start). |
| ATC/Kip |
| 1 Speaker. |
| 1 L1/L2 plug, connected to L1. |
| 1 Gray speaker transformer box with wire. |
| Start Referee |
| 2 Start lists. |
| 1 Radio (back-up communication for starter). |
NEEDED AT HIGHROAD (SPLIT AREA) |
| Kip |
| 1 Little black box with 3 ALGE eyes (2 transmitters and 1 receiver). |
| 2 Extra C size batteries. |
| 3 Mounting brackets for eyes. |
| 1 Spool of wire, connected to line S4 (Need to make). |
| 1 Hammer. |
| 3 1"x1" Stakes for mounting timing eyes. |
| ATC |
| 2 Pads for protecting timing eyes. |
| 10-99 Plain bamboo (to string wire and for pads). |
| 1 “RACE INPROGRESS” sign for Highroad crossing. |
| ATC/Kip |
| 1 Length of wire for speaker (if needed). |
| 1 Speaker. |
| 1 Gray speaker transformer box with wire. |
| 1 L1/L2 plug, connected to L1. |
| Kip |
| 1 Big Black Box. |
| 5 ALGE eyes (connect receivers to F1 and F2). |
| 5 Mounting brackets. |
| 4 Extra C size batteries. |
| 1 Hammer. |
| 1 Roll electric tape. |
| 4 Extra banana plugs. |
| 3 1"x1" Stakes for mounting timing eyes. |
| 2 Green spools of wire. (2 twisted pair). |
| 1 L1/L2 plug for ALGE headset connected to L2. |
| ALGE headset and gray ALGE box. |
| 1 Short length of wire (for ALGE headset). |
| 1 Drill. |
| 1 Gate Judge Card, for finish referee. |
| ATC |
| 1 Shovel. |
| 4 Red FINISH signs. |
| 2 Pads for protecting timing eyes. |
| 10-99 Plain bamboo (to string wire and for pads). |
| Finish Referee |
| 1 Start list. |
| 1 Radio, for back-up communication. |
NEEDED AT FINISH (Gray box, skiers left) |
| ATC/Kip |
| 1 Speaker. |
| 1 Gray speaker transformer box. |
| 1 L1/L2 plug for sound connected to L1. |
NEEDED AT FINISH (Gray box, skiers right) |
| Kip |
| 2 20' yellow wires (use line F4). |
| 1 2to4 line spliter. |
| 2 Electric scoreboards (m:ss:hh , Dial 0, toggle MIDDLE and BIB#/PLACE, Dial 0, toggle UP). |
| 2 Signs for scoreboard tops (TIME and BIB#/PLACE). |
| ATC/Kip |
| 2 PVC pipes for scoreboard. |
| 4-8 Plain bamboo. |
|
